News

 

1. Indoor installation: LED light belt is used for indoor decoration. It is easy to install since it does not need to be exposed to wind and rain. Take the LED light belt as an example. On the back of each LED light belt, there is a self-adhesive 3M double-sided adhesive tape. During installation, the stickers on the surface of 3M double-sided adhesive tape can be directly removed. If there is a need for a corner or a long range, just put the LED light built-in the form of series and parallel connection with 3 leds as a group, because every 3 leds can be cut and used separately.

2, outdoor installation: outdoor installation due to the wind blowing through the rain, if use 3 m glue, can cause a long period of time, 3 m adhesiveness reduce, LED lights off, so the outdoor installation card slot is often used to fixed way, need to cut and connection, methods as well as indoor installation, just need additionally equipped with waterproof glue, in order to consolidate the join waterproof effect.

3. Power connection method: the general voltage of the LED light belt is 12V dc, so switch power supply is needed. The power supply is established according to the power and connection length of the LED light belt. If you do not want to use a power source to control each LED light belt, you can buy a switch power source with relatively high power as the total power supply, and then connect all the input power sources of LED light belt in parallel (wire size is not enough, it can be extended), and all of them will be supplied by the main switch power supply. The advantage is the fact that it can be controlled centrally. Besides the inconvenience, it cannot realize the lighting effect and switch control of a single LED light belt. The exact method can be measured by yourself.

4. Connection mode of controller: the LED running horse light belt and the RGB full color bright belt need to use the controller to realize the changeable effect, and the control distance of each controller is different. Genera

If you think these thing is too complex for you, you can choose our flexible led strip by directly.

How to Identify the good quality flexible led strip light

1, look at the solder joints. Regular LED strip production of LED strip is SMT process, with solder paste and reflow welding process production. As a result, the solder joints on the LED strip are relatively smooth, with a small amount of solder, and the solder joints are arc-shaped, extending from the FPC pad the LED electrode. The copycat version of the LED lamp with solder spot solder amount is uniform, more dots around the welding feet .At the same time there will be different degrees of tin tip, which is a typical phenomenon of manual welding.

2, look at the quality of FPC.FPC copper and calendering copper too, the copper foil copper plate is convex, can be seen from the welding pad and FPC connection. Calendering copper is closely connected to the FPC and can be bent at will without the pad falling off. If the copper plate is bent too much, the pad will fall off. If the temperature is too high during maintenance, the pad will fall off.

3. Look at the cleanliness of the surface of the LED light belt. If SMT process is adopted to produce LED light belt, its surface cleanliness is very good, no impurities and stains can be seen. However, if counterfeit LED strip is manufactured by hand welding, no matter how the surface is cleaned, it will leave stains and traces of cleaning, which will also help flux and tin residue on the FPC surface.

Please see detail about our strip as following picture:

 

4. Look at the package. Regular LED light belt will use anti-static coil plate packaging, generally 5 meters roll or 10 meters a roll, and then use anti-static, moisture-proof packaging bags sealed. But the copy LED light belt because of the cost savings, and the use of recycling coil tray, no anti-static, moisture-proof packaging bags, carefully look at the coil tray, you can see the appearance of cleaning labels left traces and scratches.

Look at the label. Regular LED tape packages and coils have printed labels on them, not printed labels. And the label of copycat edition is printed, at the same time specification, parameter is uniform.

Our strip’s quality is without a doubt, if you have any question, please do not hesitate contact me by directly.